Merkmale
-
Technische
Artikelnummer(n)
351077-000
Technologie
AccuTouch® 5-Draht-Widerstandssensorik
Anzahl der Berührungspunkte
Einfache Bedienung
Eingabemethoden
Finger
Behandelt
Passiver SchreibkopfAbmessungen
2.36" x 3.30" x 0.40" / 59.94 mm x 83.82 mm x 10.16 mm
Schnittstelle
EIA 232E (Serial RS-232), DCE configuration. 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex
Hardware handshaking: RTS/CTS
DSR is pulled HIGH (>+3V) by the 2500S when connected and powered. DTR can be asserted by the host to interrupt the flow of dataOberflächenbehandlung
Klar
Auflösung
4096x4096, size independent, 255 levels of Z (pressure)
Conversion Time
Approximately 10.4 ms per coordinate set
Leistungsaufnahme
+4.75 to +5.25 VDC
Baudrate
9600 (default) and 19200
Reliability
MTBF greater than 300,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 25°C
Construction
Four-layer surface-mount design with internal ground plane for EMI suppression
Flammability
The printed circuit board substrate is rated 94V0. All plastic components, such as headers and connectors, are also rated 94V0.
Shock and Vibration
Three axis sine wave, 50 Hz to 2kHz, 1 G, 2 minutes/Octave with dwell on resonances
ESD
Per EN 6100-4-2 1995: Level 4. Contact discharge 8kV, air discharge 15kV.
Betriebstemperatur
0°C to 65°C
Lagertemperatur
-25°C to 85°C
Feuchtigkeit
Operating: 10% to 90% RH, noncondensing
Storage: 10% to 90% RH, noncondensingHöhe
10,000 feet
MTBF
50.000 Stunden, nachgewiesen
Montageoptionen
All mounting holes are plated through for chassis ground connection. Refer to the drawings at the end of this document.
Connectors and Pin Definitions
The connector configuration permits the controller to be placed in-line between the touchscreen and serial I/O attachments.
Controllerkabelen
Contact Elo for more information.
Optional Software/Hardware Handshaking
RTS/CTS